A water bill that climbs with no change in habits is often the first sign of a hidden leak. A running toilet, a pinhole in a pipe, or a leak under a slab can waste water for months. Finding a water leak starts with a few simple tests, and this guide covers them in order.
How to Find a Water Leak With Your Water Meter
Turn off all faucets and water-using appliances, record the meter reading, then check it again after two hours without using water. Any movement suggests a leak.
Many meters also have a small leak indicator, shaped like a triangle or star. If it spins while nothing is running, water is flowing somewhere. The U.S. Environmental Protection Agency (EPA) recommends the same two-hour test.
How Do You Test a Toilet for a Leak?
Add a few drops of food coloring to the tank and wait 10 minutes. If color shows up in the bowl, the flapper is leaking. Flush right away to prevent staining.
Toilets are one of the most common hidden leaks. The EPA says worn flappers let water seep into the bowl and recommends replacing them at least every five years. Our post on hidden causes of a high water bill also lists other culprits, including faucets, irrigation, and slab leaks.
Is the Leak Inside the House or Outside?
Close the main shutoff valve and watch the meter. If it keeps moving, the leak is in the service line between the meter and the house. If it stops, the leak is inside.
Compare gallons used, not the total due. If gallons held steady but the total rose, consider a rate change, a longer billing period, or an estimated reading. Knowing how to find a water leak by elimination saves a plumber time. Keep the meter readings and dates, because some utilities credit part of a bill for a documented, repaired leak. If the leak is inside, check the usual suspects:
- Faucets: The EPA says a faucet dripping about once per second can waste more than 3,000 gallons a year.
- Pipes and fittings: Water on the outside of a pipe or fitting shows a surface leak.
- Outdoors: The EPA says even a 1/32-inch irrigation leak can waste about 6,300 gallons a month.
Could the Leak Be on the Hot Water Side?
Yes. Close the cold water valve at the top of the water heater, then repeat the meter test. If the meter stops, the leak is on the hot side.
That leak costs you twice, because the heater must reheat the escaping water. Our guide on what a leaking water heater means covers what to do next, and our post on the electrical side of thermostat and element replacement shows what to look at.
What Should You Do if Water Reaches Electrical Parts?
Stay away from it. The Electrical Safety Foundation International (ESFI) advises never handling a breaker while standing in water or on a wet surface. If water has reached an outlet or the panel, leave the area and call for help.
After a leak, inspect wet outlets and corroded connections before using them again. Our post on electrical warning signs you should never ignore covers what to watch for.
A breaker that trips after a leak is another warning. Read why a breaker keeps tripping, and ask our electrical repairs team to inspect the circuit.
Conclusion
A hidden leak leaves clues: a moving meter, a colored toilet bowl, a bill that rises with no new habits. Work through the tests in order, then separate what a plumber should fix from what an electrician should check. The EPA estimates the average household loses more than 9,300 gallons a year to leaks.
Bray Electrical is a locally owned, family-operated electrical contractor, licensed and insured in Georgia since 2004. If a leak may have reached your wiring, contact our team for a licensed electrician to inspect it.
Frequently Asked Questions
Two hours without using any water, according to the EPA. Any change in the reading means a probable leak.
Yes. Water in outlets or junction boxes can corrode connections and trip breakers. Keep power off until the area is dry and inspected.
No. A plumber handles pipes and fixtures. We handle the electrical side, including wet wiring, breakers, and panel capacity.
Close the cold water valve at the top of the water heater and repeat the meter test. If the meter stops, the leak is on the hot side.
It can. Many utilities calculate sewer charges from metered water, so one leak can raise two line items.